Can you change the stock on an AR-15?

Most AR tools have a cutout where you can attach a torque wrench like the one shown here. Tighten the extension tube with about 35 foot-pounds of force. Once the tube is installed, you can just slide the new buttstock into place.

Can you change calibers on an AR-15?

Though a majority of AR-15s come in the classic 5.56 NATO round, with a conversion kit you can swap out to another caliber.

Can a stock fit on a AR pistol?

An AR pistol cannot use a standard rifle stock. You must use a pistol stabilizing brace.

What is the difference between mil spec and commercial buffer tubes?

The mil-spec tube threads—produced from 7075 T6 alloys—are rolled into the metal, resulting in taller and stronger threads. Commercial tube threads, on the other hand, are constructed from 6061 T6 billet aluminum and are cut into the metal, producing slightly shorter and weaker threads but at a lower cost.

What is the lightest AR stock?

Here’s a quick round-up of some popular stock options for lightweight, low-profile features to round out your minimalist AR-15 build.

• ATI – Tactlite ($49.99)
• Blackhawk – Knoxx Axiom ($59.95)
• IMI Defense – TS2 ($109.95)

How much does an AR-15 lower cost?

If you have both time, and money, you can purchase parts for an AR-15 that could reach thousands of dollars. Just doing a simple internet search, you can find a stripped AR-15 lower that runs $200 or more.

How to remove the stock from an AR-15?

By lifting the adjustment lever, you can slide the stock completely off the extension tube. Now, remove the buffer and spring from the tube. Just press down on the detent pin and they will slide out. Carefully loosen the locking ring using an AR armorer’s tool. It will turn in a counter-clockwise direction when looking back to front.

Can you replace the buttstock on an AR-15?

Though replacing the buttstock on an AR-15 appears to be a simple thing, it can actually be just a little bit complicated. However, once you know the different sizes of AR stocks, tubes, and buffers, things get much easier.

How do I remove the detent pins on my AR-15?

Just press down on the detent pin and they will slide out. Carefully loosen the locking ring using an AR armorer’s tool. It will turn in a counter-clockwise direction when looking back to front.

Can You Weld a buttstock on an AR-15?

The AR-15 is a customizable sporting rifle, and collapsible buttstocks are no exception. The stock ones on new AR-15’s are often too simple, and don’t allow you to obtain a comfortable cheek weld. Here is a fast and simple way of removing and replacing the buttstock on an AR.