Whats the difference between a flush cutter and a side cutter?

Answer: The term “flush” means level or straight and on the same plane, so flush cutters cut a wire level. Side cutters or angle cutters, cut on an angle, meaning the wire edge will be cut to one side. The choice of use is totally up to you, the wire jewelry maker.

What is the function of flush cutters?

Flush-cutters – provide an unbroken, even cut to the material for a clean design look. Quite versatile, there are a variety of flush-cutters to choose from for cutting different size wire.

Can wire cutters cut gold?

Super flush wire cutters allow you to cut a nearly flat surface on your silver and gold filled wire.

What are diagonal cutting pliers?

Diagonal cutting pliers are used for cutting wire and small pins in areas that cannot be reached by larger cutting tools. Because the cutting edges are diagonally offset about 15 degrees, these can cut objects flush with a surface.

What are bent nose pliers used for?

Bent nose pliers are ideal for getting into and gripping hard to reach places, they can also be used for opening and closing jump rings and shaping wire. The bent angle of tips means that you can see your work without the handles getting in the way of your line of sight.

What is the function of long nose pliers?

Proper use of long nose pliers: Use to grip small objects, reach awkward places, holding wires, bend loops, and attach wires. Work involving smaller gauge wire.

Can you cut a ring off with pliers?

Jewelers can cut the shank in either one or two places. If cut in one place, the jeweler will then use a special pair of pliers to make the cut wider and allow you to remove the ring. If cut in two places, the section of the ring can be easily removed and then the other half of the ring will follow suit.

How do you sharpen end cut pliers?

How to sharpen blunt diagonal cutters pliers

1. Step 1: Assemble the tools.
2. Step 2: Clean the cutters.
3. Step 3: Set up the dikes on a vise.
4. Step 4: File or whet the cutting edge.
5. Step 5: Test the pliers.
6. Step 6: Wipe the blades.
7. Step 7: Apply machine oil on the blades.

How do you sharpen hobby cutters?

Can you sharpen dull cutting edges on a sprue cutter?

1. Step 1 – Colour sprue cutter back. Using the marker pen, colour the flat back side of the sprue cutter jaws.
2. Step 2 – File down jaws.
3. Step 3 – Repeat on inside of jaws.
4. Step 4 – Sharpen inside of jaws.

What are diagonal pliers mainly used for?